Ha Hoa, Phu Tho, Vietnam
Plywood in volume, finished like furniture.
Commercial and furniture plywood pressed in northern Vietnam at around 60,000 m³ a year. Poplar, EV, Okoume, Bintangor and Pine faces on Styrax, Acacia or Eucalyptus cores, 3 to 40 mm, shipped to Europe first and to buyers worldwide.
In short
Truc Mai Plywood is a large-volume Vietnamese manufacturer of commercial plywood and furniture and interior plywood, based in Ha Hoa, Phu Tho. The mill has around 60,000 m³ of annual capacity, holds FSC® chain of custody (FSC-C196493), ISO 9001:2015 and ISO 14001:2015 for plywood manufacturing, and exports with Europe as its first market.
Capacity
Around 60,000 m³ a year lets Truc Mai run repeat programmes for furniture makers, distributors and panel processors without stalling between containers. The same face, core and press settings come back order after order.
Around 5,000 m³ in an average month.
More face veneers on request.
Styrax, Acacia, Eucalyptus or combined.
One to two products per container as standard; more by agreement.
Two lines
Both lines are pressed in Ha Hoa from the same plantation-grown cores. What changes is the core grade, the sanding and the face you put on top.
Honest, flat panels for joinery, shopfitting, crates, partitions and distribution stock. AB-grade cores laid loose or jointed, light sanding, faces chosen for price and look.
Calibrated, smooth panels for cabinets, shelving, wall panelling and furniture parts. A-grade cores, core stitching on the outer layers and a polished sanded finish ready for lacquer, laminate or UV coating.
Face veneers
Plywood takes its name from its face. These five run as regular production at Truc Mai; Gurjan, Eucalyptus, Sapele and other veneers are available on request.
Near-white, plain and calm. The base for painted, lacquered and laminated furniture. Natural Poplar is also available.
Straight, even grain in one consistent colour from sheet to sheet. Oak-look, walnut-look and other tones by order.
Soft pinkish-beige with gentle figure. A warm, paintable face for interiors and joinery.
Reddish-brown with fine interlocked grain. The classic commercial face for general use and distribution.
Pale cream to light honey, soft cathedral figure and small sound knots. Warm and natural for visible furniture and shopfitting.
Cores
Cores are peeled from plantation trees grown around Phu Tho. The core decides weight, stiffness and how the panel machines, so choose it for the job.
White, light and even. The furniture core: clean edges, low weight per sheet and more cubic metres per container.
Firm and stable at a mid weight. A dependable core for commercial plywood and film-faced panels.
Dense and stiff. Chosen where screw holding and load matter more than weight.
Species laid together to balance price, weight and strength for the order.
Unretouched photographs
Faces, edges and clamped stacks photographed as they are: daylight, cropped, nothing retouched.
Sizes and thickness
Three standard formats plus custom sizes. Cut-to-size orders split a full sheet into 4, 6 or 8 smaller panels before packing.
Thin panels from 3 to 6 mm are built in five layers; 18 mm usually in eleven to thirteen.
Also supplied
Economical panels for crates, pallets and transport packaging, in the sizes your packing line uses.
Phenolic film over Acacia or Eucalyptus cores, edges sealed, for concrete formwork and hard-wearing surfaces.
Laminated veneer lumber with every veneer running the same way, for beams, frames, door cores and shelving.
Certificates
Truc Mai holds FSC® chain of custody and ISO certification for plywood manufacturing in its own name. Market-specific documents are arranged for each order.
FSC-C196493
FSC® 100% plywood with the claim stated on sales documents for eligible orders.
ISO 9001:2015
Certified quality management system for plywood manufacturing.
ISO 14001:2015
Certified environmental management system for plywood manufacturing.
*Supplied directly or through qualified partner mills.
How a panel is built
Quality in plywood is made in the grading and the pressing. This is the order every Truc Mai panel follows.
Face, core, grade, glue, emission class, size, thickness and packing are fixed in writing before production.
Plantation logs are rotary-peeled into continuous core veneer and dried to a stable moisture content.
Core sheets are sorted by grade; A-grade goes to furniture plywood, AB-grade to commercial plywood.
Cross-laid layers are assembled and, for furniture plywood, stitched on the outer layers so the core stays closed.
A cold pre-press sets the core, a hot press bonds it; the face goes on and is pressed again for a flat, smooth sheet.
Panels are calibrated, sanded to the agreed finish and trimmed square to size.
Thickness, face and squareness are checked sheet by sheet before strapping into export crates.
Where it goes
Styrax-core furniture plywood, light and screw-friendly.
Flat, calibrated panels that hold a span.
EV and Okoume faces for visible interior surfaces.
Cut-to-size blanks delivered ready for the CNC.
Pine and Bintangor faces for counters, displays and fixtures.
Packing plywood for transport cases and pallets.
Where the wood comes from
Ha Hoa sits among plantation forest in the midlands of Phu Tho. Core logs travel a short distance from planting to peeling, which keeps the cost of a good core down and the supply steady through the year. For EU buyers, an EUDR dossier with geolocation and GeoJSON files is available.
Markets and terms
Clear terms, written into every quotation.
Shipping documents
Certificate files are shared before the order is confirmed; draft shipping documents go to the buyer for approval after loading.
How to order
Application, face, core, glue and emission, size, thickness, quantity and destination port.
Price basis, production time, packing and documents, in writing.
Check the face, core and finish before production starts.
Deposit, production, inspection and loading at Hai Phong.
Questions
Short answers to the questions that come before the first container.
[email protected]Truc Mai Plywood is a manufacturer. Panels are pressed at the mill in Ha Hoa, Phu Tho, Vietnam, which has around 60,000 m³ of annual capacity.
Ha Hoa, Phu Tho, in northern Vietnam. Export containers load at Hai Phong port.
Poplar and bleached Poplar, EV (engineered veneer), Okoume, Bintangor and Pine as regular faces. Other face veneers are available on request.
Styrax for light furniture panels with clean edges, Acacia for stable commercial and film-faced plywood, Eucalyptus where density and screw holding matter. Combined cores balance price and weight.
1220×2440, 1220×2280 and 1250×2500 mm, custom sizes up to 1250×2500 mm and cut-to-size panels, in thicknesses from 3 to 40 mm.
Yes. Truc Mai holds FSC® chain of custody under licence code FSC-C196493 for FSC® 100% plywood.
Yes. Panels are made to the emission and quality requirements European furniture buyers set, with UF glue at E0 emission as standard. CARB P2 / TSCA Title VI, CE and PPWR test documents are available.
Yes. We supply the EUDR dossier: timber origin records with geolocation and GeoJSON files for each EU shipment.
One 40HC container. A container usually carries one or two products; three to six can be mixed by agreement.
15 to 45 days after the deposit, depending on quantity and specification.
30% deposit and 70% against a copy of the bill of lading, by T/T or irrevocable L/C at sight. Delivery is FOB Hai Phong, CFR or CIF.
Yes. Repeat buyers receive samples free. New buyers book their own courier, and the cost is credited against the first order.
Start an order
Send the face, core, thickness, size, quantity and destination port. Quotations and samples are handled in English by email.
